37mm 3D Printed Payload Shells With Burst Disk X3, fits metal 37mm launchers!

Description

(First off this is not an ammunition! Or a weapon! or military item! This is for reenactments, display, crafting ,Exedra)
For Sale are  (3) 37mm 4inch Payload Shells 3D Printed With Burst Disk...
These will fit the inside diameter of a 37 mm flare launcher !  only use a metal flare launchers launchers do not try to use plastic flare launchers - launcher!!!!
These are very stable and flight and can travel a pretty good distance depending on your cup load ..
( these are just the projectiles empty with the fuse hole burst disc and cap...) Payload Cups - Configurations - 1.295"OD/1"ID
These are 3D printed items so they may require light sanding or trimming to fit the barrel perfectly you want it to move freely. each launcher is different slightly so please check clearance before use!
Colors may vary but are either made out of pla or abs...
Remember keep your hands off the chamber area/barrel when firing 37mm flare launchers and stay safe with your loads! Use these at your own risk! I accept 0% responsibility for their use or misuse. Ive used for Smoke Loads in the past worked great!
Great for smoke, firework or other use at your discretion! Or You can paint them and make good displays!!! ( please keep things legal with Use!!!)
(This is a complement for your launcher this in no way shape or form is a weapon it is not capable of being a weapon!)
Condition is "New". Shipped with USPS First Class.