25-500ml hydrothermal synthesis reactor with PTFE lining chamber

Description

Store category
Sign Up Now !
You may also like
25-500ml hydrothermal synthesis reactor with PTFE lining chamber
Product Description
Introduction：
The listed items are 1 set of
Hydrothermal synthesis reactor
with P
TFE or PPL Liner included.
If you need only the liner
please check my other listings.
Hydrothermal synthesis reactor is used in catalysis, crystal, polymer and other experiments, it adopts the external heating mode, in order to reduce the size, and suitable for sevral reaction kettles working at the same time and same reaction temperature (for example, put sevral reactors inside the oven for heating), special models can be customized.
Hydrothermal synthesis reactor, also known as digestion, pressure melting bombs, hydrothermal synthesis reactor, high temperature and pressure digestion vessels, PTFE high-pressure tank is in a certain temperature and pressure conditions, certain synthetic chemicals supplied reactor.
It is widely used new materials, energy, environmental engineering and other fields of scientific research and experiments, is university teaching, scientific research units commonly used small reactors.
Main indicators
Safe Operating temperature:
250℃=482
℉
( PPL）    180
℃=356
℉
（PTFE）
PTFE: 5/10ml/ 15ml/25ml/50ml/100ml/150ml/200ml/250ml/300ml/400ml/500ml/1000ml
PPL:
25ml/50ml/100ml/150ml/200ml/250ml/300ml/400ml/500ml
Working pressure:
3MPa (gauge)
Heating, cooling rate:
5 ℃ / min
Item can be customized according to your requirements.
Features:
1. To dissolve the refractory material and to pretreat the samples in atomic absorption spectrometry and plasma emission analysis,etc.
2. This type hydrothermal synthesis reactor is most suitable for small dose synthetic reaction, to rapidly dissolve the refractory material under the reactor inner strong acid or strong base and high temperature & high pressure airtight environment.
3. To do sample preparation in the gas phase, liquid phase, plasma mass spectrometry, atomic absorption and atomic fluorescence spectrum and chemical analysis method.
4. Is an idea instrument to dissolve samples when you measure trace elements and trace elements.
5. Could be used in the measurement of lead, copper, cadmium, zinc, calcium, manganese, iron, mercury and other heavy metals. Also can be used as a reaction vessel which has high temperature resistance, high pressure resistance and corrosion prevention.
6. Is suitable for organic synthesis, hydrothermal synthesis, crystal growth or sample digestion & extraction,etc.
7. In sample pretreatment to dissolve heavy metals, pesticide residues, food, silt, rare earth, aquatic products and organic matter,etc.
Advantages:
1.High temperature resistance: Teflon material actual measuring operating temp. is higher than 220℃, advise safe operating temp. ≤ 220℃. PPL material actual measuring operating temp. is higher than 280℃, advise safe operating temp. ≤ 280℃.
2. Low temperature resistance: -196℃ could keep 5%.
3. Ultra corrosion resistance: resistant to strong acid, strong base, aqua regia and all kinds of organic solvent.
4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency.
5. High lubrication: the friction coefficient of solid materials is lowest.
6. No adhesion: don't adhere to any material, self lubricity is strong, the friction coefficient of solid materials is 0.04.
7.Non hazardous: has physiologically inert, can be embedded in human body, strong aging resistance, guarantee hydrothermal synthesis reactor long service life.
8. Anti-pollution: the baseline value of metallic element is low, lead content ＜ 10-11g/ml, uranium content ＜ 10-12g/ml.
9. Leakproof: falling down from 1.2m high place, hydrothermal synthesis reactor body is no fracture, reactor lid is not loose, no break and leakage phenomenon.
Methods of operation
The reaction means and the reactor body, and to ensure feeding coefficient is less than 0.8.
When the Department of corrosive reaction when you want to put PTFE bush, can only be assured kettle body from corrosion.
Hydrothermal synthesis reactor will be placed on the heater, in accordance with the provisions of the heating rate of heating to the desired reaction temperature (less than the required safety temperature).
Completion of the reaction will be when its cool, but also in strict accordance with the provisions of the cooling rate operation, to facilitate the safety and reactor life.
When confirmation of intra-abdominal temperature below the boiling point solvents reaction system can only open the tank lid after a follow-up operation.
Hydrothermal synthesis reactor each time after use to clean, to avoid corrosion.
Kettle body, kettle lid seal line to pay particular attention to clean and prevent damage to the bumps.
Payment
Shipping
Return policy
Contact us & Warranty
Working time
Payment
We accept PayPal only.
Payment must be received
within 7 business days
of auction closing.
We
ship to PayPal's address
only. Please make sure your address in EBAY can match with your shipping address on PayPal.
All major credit cards are accepted through secure payment processor PayPal.
TOTAL AMOUNT DUE includes the final auction price plus S&H (Shipping and Handling).
S&H will be determined based upon the ship to address.
PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
Shipping
1. Item processing time. We will ship the products within 1-5 working days upon the confirmation of your cleared payment, when buyers have some special request (e.g.Voltage, color...etc.), we may delay to ship the orders and will inform buyers about it. Do please check your message box in 1-2 days after payment is cleared. Otherwise
order may be cancelled due to insufficient of your information.
2.Shipping methods. Items are shipped out via SpeedPAK or E-packet or any other shipping method that can fit your country, we will choose the reasonable
way for you.
3. Delivery time may vary with countries and international shipping for some countries may be much slower than expected. Also your local custom may delay the shipping a lot due to the custom duty they want to charged from you for importing this item from other countries.
Note: Any Import or export duties and the cost of dispatching for remote areas, will be borne by the buyer, because it is difficult to know all country's custom duty or remote area before shipping the item.
4. Please Note
buyers from some of the countries may need to contact us
before making payment.You may be requested to pay extra shipping cost charged by shipping company otherwise order may be cancelled automatically due to insufficient payment for shipping. We need to revise your invoice before your payment please...
Return policy
(1) Taking photos and sending it via eBay Message Box.
Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box.
(2) How we will react? We will investigate the case and may send you the missing item or replacement or refund upon the situation of the case. (sometimes you may be requested to return the incorrect item).Or if it is not seller's error, buyer may need to cover the returning cost.
(3) Valid time for returning. Please contact us within 7 days upon receiving the package.All items must be returned within 30 days of purchasing the item.
Contact us & Warranty
Warranty: 3-24 months warranty is provided to our products. The length of the warranty depends on the nature of the products. Please contact us if you are wondering about how the warranty works for your item.
Contact: Do please contact us before leaving any negative feedback or Opening any kind of case. We promise to achieve your 100% satisfaction. But negative feedback actually can not solve any problem. Thank you so much for your kindness and understanding.
Working time
Beijing time :AM 8:00 -PM 8: 00