150DB 12V Single Trumpet Air Horn Compressor Kit For Van Train Car Truck Boat

Description

Product Information
This chrome look, single trumpet horn, will produce a strong power driven sound. The trumpets are made of metal to ensure better sound quality, maximum strength and durability. The system includes one maintenance free heavy duty 12 volt air compressor, hose, relay and mounting hardware. The perfect compact solution to enjoy a loud horn sound on all vehicles with a 12V system.
Features
Single Trumpet Train Air Horn Kit (Chrome)
Zinc alloy Trumpet with Metal Base Construction
12V Heavy Duty Air Compressor
Can be mounted on roof, or under the hood
Horn Size: 17" L x 4" Dia
Included in this kit
150DB 12V Single Trumpet Air Horn Compressor Kit For Van Train Car Truck Boat
Product Information
This chrome look, single trumpet horn, will produce a strong power driven sound. The trumpets are made of metal to ensure better sound quality, maximum strength and durability. The system includes one maintenance free heavy duty 12 volt air compressor, hose, relay and mounting hardware. The perfect compact solution to enjoy a loud horn sound on all vehicles with a 12V system.
Features
Single Trumpet Train Air Horn Kit (Chrome)
Zinc alloy Trumpet with Metal Base Construction
12V Heavy Duty Air Compressor
Can be mounted on roof, or under the hood
Horn Size: 17" L x 4" Dia
Included in this kit
Single Trumpet Air Horn
12V Heavy Duty Air Compressor
4-PIN 12V/30A Pre-wired Relay
3/8" OD Air Hose
Mounting Hardware
Specification
Size:17.7"x4"（450×95(dia)mm）
Hose Length：17.7"（450mm）
Compressor Size：（4.4"x2"）112x50mm
Weight:2.5 lb
Volt:DC 12V
Current:18.0A
Impedance:1Ω
Sound Level:150dB
Operation Air:15-22 PSI(0.1Mpa-0.15Mpa)
Material:Metal/Chrome Plated ZINC Trumpets(Non-Rusting)
Color:Chrome
SAFETY INSTRUCTIONS
Make sure you never attempt to disassemble this horn kit’s electrical components.
Never use your bare hands to any part of the compressor immediately after or during use.
Avoid operating this product in an area with risk of falling or submergence into a liquid (water).
Do not reach out for or touch any component that has fallen or been submerged into water.
Make sure you set up in areas with good ventilation.
Never sound the air horn anywhere near your ear(s) or that of another person.
Make sure your battery ground is detached before getting your installation started.
Employ equipment for eye protection during drilling operations.
The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power source of 12 volts.
Installation Tips
HORN MOUNTING
Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of
the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive shaking. Do not attach the horn to any plastic or other flexible material.
Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a drill.
Use the provided mounting hardware to fasten the horn.
COMPRESSOR MOUNTING
The ideal location for the compressor to be installed is a dry area inside your engine compartment where it will be safe from exhaust and engine manifold heat.
To make the compressor firm and secure, drill a hole of 3/16". IMPORTANT: The compressor must be mounted vertically (with air exhaust port facing downward).
Install the bolt’s head into the compressor housing’s slot. Tighten the compressor firmly to the vehicle with the provided lock washer and nut.
AIR LINE INSTALLATION
Connect one side of the airline to the compressor’s air exhaust port and the other side to the trumpet's barbed fitting.
Do not make any sharp bends or kinks in the tubing which could alter the sound of the horn or even restrict airflow.
IMPORTANT: Airlines are sometimes already pre-installed. In such situation, ensure that they are inserted entirely into the fittings on the trumpet and compressor.
ELECTRICAL CONNECTIONS (FACTORY HORN SWITCH)
For vehicles with a two-terminal factory horn, transfer the wires to the compressor’s terminals. If the horn doesn’t sound even if the compressor motor turns on, simply reverse the wires.
For vehicles with one-terminal factory horns, make sure you transfer the wire to the compressor’s positive (+) terminal. The negative (-) terminal uses a 16-gauge wire or heavier to connect to ground.
ELECTRICAL CONNECTIONS (NEW HORN BUTTON)
In a dry location, install the relay provided making sure that terminals face downwards near the horn.
Using a 16-gauge wire or heavier, connect PIN 87 of the relay to the positive (+) terminal of the compressor.
Connect PIN 85 of the relay to the horn button (not provided). The other horn button terminal is attached to any rust and paint free metal to ground
. Connect using an 18-gauge wire or heavier.
Connect PIN 30 and 86 of the relay to the battery, alternator or other positive (+) of 12-volts. Make sure the wire used is a 16-gauge wire or heavier. Use a 20A fuse (not provided) to protect the electrical circuit.
Maintenance
Always keep the appearance of the horn clean and all wiring reliable.
Regularly check and tighten the fixing screws of horn and bracket to ensure reliable grounding.
The fixing method of trumpet has great influence on its pronunciation. In order to make the sound of the horn normal, the horn can not  be rigidly installed, so it is fixed on the buffer bracket, that is, between the horn and the fixed bracket, a leaf spring or rubber pad should be installed.
Check the output voltage of generator regularly. If the voltage is too high, the horn contact will be burned. If the voltage is too low (lower than the rated voltage of the horn), the horn will make abnormal sound.
When washing the car, it is not allowed to wash the trumpet directly with water, so as to prevent the water from entering the trumpet and the trumpet from sounding.
When repairing the horn, pay attention to the position of each metal pad and insulation pad, and do not install them wrong.
The continuous pronunciation of the horn shall not exceed 10s to avoid damaging the horn.
Do not put all kinds of foreign matters into the horn to avoid abnormal sound.
Item Specifics
UPC :
Does not apply
Brand :
topcn-autoparts
Manufacturer Part Number :
TOP10808201CN
Type :
Horn
Horn Type :
High Pressure Air
Features :
Quick Release
Material :
Chrome
Color :
Silver
Placement on Vehicle :
Left
Fitment Type :
Direct Replacement
Mounting Hardware Included :
Yes
Warranty :
1 Year
Custom Bundle :
No
Modified Item :
No
Surface Finish :
Chrome
Interchange Part Number :
Air Horn
Other Part Number :
Single Trumpet
Superseded Part Number :
Truck Car SUV Boat Motorcycle Boat Horn
Diameter :
3.74"
Current :
18.0A
DB Output :
150 DB
Volt :
DC 12V
Impedance :
1Ω
Operation Air :
15-22 PSI
Weight :
2.49 lb
Length :
17.72"
Kit or Single Part :
Kit
Shipping
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
Payment
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
Returns
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
Customer Services
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
Feedback
1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Ignition Coils
complete struts
Radiator Support
Wheel Hub Bearing
Wheel Adaptor
Exhaust System Parts
Oxygen Sensor
Towing mirrors
Fuel pump assembly
Lift supports
Interior Light
◈  Instrument Light
Starter
Exterior Light
◈  License Plate light
Key or key case
struts
floor mats
wheel lug nuts
Cylinder Piston Gasket Kit
Cylinder Head Gasket Sets
CV Axle
Door handle
Radiator
fastener
LED Lighting
UTV & ATV Brake System Parts
▷  Brake Pads
♢  Sintered Brake Pads
♢  Kevlar Carbon Brake Pads
◈  Brake Shoes
Regulator Rectifier
blower motor fan
blower motor resistor
suspension kit
◈  suspension wenjie
◈  suspension cj
◈  suspension gxy
◈  suspension fu
AC Compressor
Brake system
◈  Brake Rotors
◈  Brake Pads
◈  Brake Rotors and Pads
◈  Brake Pad Sensor
◈  Brake Drum
◈  Brake Shoes
Car Seat Cover
Air Suspensions
Nerf Bars & Running Boards
Grilles
Window Switch
Mass Air Flow Sensor-MAF
Window Regulator
Side Fender marker
ball joint
Alternator
Electrical & Test Equipment
Leveling Lift Kit
Car Cover
Fuel Injector
Automotive Tools
License Plate Frame
Windshield Wiper Motor
Thermostat Housing
Radiator Coolant Tank
Fuel Tank Pipe
Valve Cover
Door Lock Actuator
Power Steering Pump
Timing Solenoid Valve
Electric Water Pump
Timing Chain Kits
Timing Belt Kits
Water Pumps
Oil Pump
Strut Tie Bar
Tire Pressure Sensor
Throttle Body
Harmonic Balancer
Oil Pan
Motorcycle Carburetor
Urea Pump
EGR Valve
Intake Manifold
Cooling Fan
Cooling Fan Clutch
Oil Cooler
Hydraulic Lifter&Roller Lifter
Suspension+Strut+Bearing
Wheel Lock
Gas Can Spout
Starter Relay Solenoid
Cab Marker Light
Head/Fog/Tail Light Assembly
Towing&Hauling
HVAC
ATV Rear Wheel Axle
Parking sensor
Car Antenna
ABS Wheel Speed Sensor
PTO Clutch
Spoilers & Wings
Intake Exhaust Valves
Vacuum Pump
Tensioners
Purge Valve
Knock Sensor
Turbocharger
Clock Spring
Detection tools
Crankshaft Position Sensor
Camshaft Position Sensor
MAP Sensor
Oil Pressure Sensor
Throttle Position Sensor
Stator
Catalytic Converter
idle air control valve
Transfer Case Shift Motor
Secondary Air Injection Pump
Running Board Motor
Clutch Slave Cylinder
Consoles & Parts
Roof rack
Bumper
Tire Pressure Gauge
Steering Rack
Air Diesel Heater
Spark Plug Ignition Wire
Engine Mount
Glow Plug
Air Cleaner Filter Box
Ignition Coil Distributor
Cylinder Piston Kit
LED Package Light
Pressure Tester Gauge
Jack Stands
Wheel Lug
Sun Visor
window visor
trim tilt motor
wiring harness
ATV Brake Caliper
Car Carburetor
EGR Tube Pipe
Air Intake Hose
Cold Air Intake Kit
Oil Catch Can Tank
Crankcase Vent Valve
Horns
Heater Control Valve
Steering U-Joint
Fuel Shut Off Solenoid
Fuel Cell Tank
Height Level Sensor
Temperature Sensor
Driveshaft
Vacuum Actuator
Air Ride Suspension Valves
Calipers & Rotors
◈  Calipers & Rotors Pads
Radiator Hose
Release Cable
Ballast module
Rubber Seal Strip
Dipstick
Removal Open Tools
Camshaft & Crankshaft
ATV Brake Master Cylinder
Rocker Arm
4WD Actuator
Trailer Adapter
Battery Switch
Rotary Vane Vacuum Pump
Throttle Cable Carb Bracket
Oil Filter Wrench
Oil Fuel Hose Line
brake Hose Line
LED headlight Assembly
Instrument Light
LED 3RD Brake Light
headlight motorcycle
Foot Rest Pedal
O Ring
Neutral Safety Switch
Oil Transter Pump
Instrument lights
water Pump Impeller
Strut Mount
A/C Expansion Valve
Wheel Stem Air Valve Cap
Crankcase Breather Filter
Splash Guards & Mud Flaps
Intercooler Pipe Kit
Heater Cores
Evaporators
vehicle speed sensor
RV Water Pump
Fuel Pressure Regulator
Light Bar Mount Bracket
WASTEGATE
Sensor-8
tire cover
CV axle+Brake Pads/Rotors
universal spacer
Steering Shaft
transmission filter
Steering Wheel
Steering Wheel Hub
Steering Gear Box
Hydraulic Hand Brake
snorkel air intake
CDI BOX
Proportioning Valve
Alternator Bracket Kit
Spindle
Window Glass Hinge
Other Golf Cart Parts
Intercoolers
Crankshaft Pulley
Steering Knuckle
Recoil Starter Pull Start
4 pcs wheel hub bearing
ATV Tires
Tire Inflator Air Pump
Brake Line Lock Kit
Fender Flares
jumper cable
Hood Latch Lock
Other Handlebars & Levers
Tonneau Cover
Bug Shield
Front Bumper Lip
dash cover
primary drive clutch
air check valve
golf
Brake Line Tubing Kit
Kick Start Starter Lever
carburetor intake mainfold
Fuel Switch Valve
Garden Water Pump
Switch Panel
air vent
Car Window Film Tint Tools
Windshields
Ignition Wires
Lower Kits & Parts
Cargo Cover
Leaf Springs
Shift Knobs & Boots
Other Motorcycle Parts
Hub Caps
Motorcycle Exhaust Pipe
ATV Ignition Switch
fog lights
Rear View Camera
Jeep Wrangler Headlights
Pivot Brake Clutch Lever
Power Brake Booster
Drop Spindle Lowering Kit
Other
Hot Item
2 Front Hood Gas Lift Supports Strut Shocks Spring For Dodge Ram 02 -10 4364
USD 27.87
For Ford F-150 Expedition 5.4L 4.6L Explorer Lincoln DG508 Ignition Coil 8 Pack
USD 35.99
2X Front Wheel Hub & Bearing Assembly For Chevrolet Impala Pontiac Grand Prix
USD 59.07
2 Front Hood Lift Supports Struts Shocks For Dodge Ram 1500 2500 3500 4500 5500
USD 26.85
2 for Dodge Challenger 2008 2009 2010 2011 2012 2013 2014 Keyless Remote Key Fob
USD 22.79
New List Item
4Pcs for 98-03 Sienna Black Exterior Door Handles Right&Left Side Front&Rear
USD 32.86
Rear Brake Cluster Assembly Fit For Yamaha Gas & Electric golf cart
USD 149.22
Starter fits Dodge Ram Truck 5.7 SMT0245 M0T21371 04801253AA 4801253AA 410-48131
USD 57.75
Fits 4879 For 02 Lincoln Blackwood98-06 Lincoln Navigator AC Condenser 5.4L
USD 57.98
2) For 03-09 Dodge Ram HD Red LED Fender Bed Side Marker Lights Red Lenses Rear
USD 12.04
150DB 12V Single Trumpet Air Horn Compressor Kit For Van Train Car Truck Boat
Product Information
This chrome look, single trumpet horn, will produce a strong power driven sound. The trumpets are made of metal to ensure better sound quality, maximum strength and durability. The system includes one maintenance free heavy duty 12 volt air compressor, hose, relay and mounting hardware. The perfect compact solution to enjoy a loud horn sound on all vehicles with a 12V system.
Features
Single Trumpet Train Air Horn Kit (Chrome)
Zinc alloy Trumpet with Metal Base Construction
12V Heavy Duty Air Compressor
Can be mounted on roof, or under the hood
Horn Size: 17" L x 4" Dia
Included in this kit
Single Trumpet Air Horn
12V Heavy Duty Air Compressor
4-PIN 12V/30A Pre-wired Relay
3/8" OD Air Hose
Mounting Hardware
Specification
Size:17.7"x4"（450×95(dia)mm）
Hose Length：17.7"（450mm）
Compressor Size：（4.4"x2"）112x50mm
Weight:2.5 lb
Volt:DC 12V
Current:18.0A
Impedance:1Ω
Sound Level:150dB
Operation Air:15-22 PSI(0.1Mpa-0.15Mpa)
Material:Metal/Chrome Plated ZINC Trumpets(Non-Rusting)
Color:Chrome
SAFETY INSTRUCTIONS
Make sure you never attempt to disassemble this horn kit’s electrical components.
Never use your bare hands to any part of the compressor immediately after or during use.
Avoid operating this product in an area with risk of falling or submergence into a liquid (water).
Do not reach out for or touch any component that has fallen or been submerged into water.
Make sure you set up in areas with good ventilation.
Never sound the air horn anywhere near your ear(s) or that of another person.
Make sure your battery ground is detached before getting your installation started.
Employ equipment for eye protection during drilling operations.
The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power source of 12 volts.
Installation Tips
HORN MOUNTING
Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of
the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive shaking. Do not attach the horn to any plastic or other flexible material.
Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a drill.
Use the provided mounting hardware to fasten the horn.
COMPRESSOR MOUNTING
The ideal location for the compressor to be installed is a dry area inside your engine compartment where it will be safe from exhaust and engine manifold heat.
To make the compressor firm and secure, drill a hole of 3/16". IMPORTANT: The compressor must be mounted vertically (with air exhaust port facing downward).
Install the bolt’s head into the compressor housing’s slot. Tighten the compressor firmly to the vehicle with the provided lock washer and nut.
AIR LINE INSTALLATION
Connect one side of the airline to the compressor’s air exhaust port and the other side to the trumpet's barbed fitting.
Do not make any sharp bends or kinks in the tubing which could alter the sound of the horn or even restrict airflow.
IMPORTANT: Airlines are sometimes already pre-installed. In such situation, ensure that they are inserted entirely into the fittings on the trumpet and compressor.
ELECTRICAL CONNECTIONS (FACTORY HORN SWITCH)
For vehicles with a two-terminal factory horn, transfer the wires to the compressor’s terminals. If the horn doesn’t sound even if the compressor motor turns on, simply reverse the wires.
For vehicles with one-terminal factory horns, make sure you transfer the wire to the compressor’s positive (+) terminal. The negative (-) terminal uses a 16-gauge wire or heavier to connect to ground.
ELECTRICAL CONNECTIONS (NEW HORN BUTTON)
In a dry location, install the relay provided making sure that terminals face downwards near the horn.
Using a 16-gauge wire or heavier, connect PIN 87 of the relay to the positive (+) terminal of the compressor.
Connect PIN 85 of the relay to the horn button (not provided). The other horn button terminal is attached to any rust and paint free metal to ground
. Connect using an 18-gauge wire or heavier.
Connect PIN 30 and 86 of the relay to the battery, alternator or other positive (+) of 12-volts. Make sure the wire used is a 16-gauge wire or heavier. Use a 20A fuse (not provided) to protect the electrical circuit.
Maintenance
Always keep the appearance of the horn clean and all wiring reliable.
Regularly check and tighten the fixing screws of horn and bracket to ensure reliable grounding.
The fixing method of trumpet has great influence on its pronunciation. In order to make the sound of the horn normal, the horn can not  be rigidly installed, so it is fixed on the buffer bracket, that is, between the horn and the fixed bracket, a leaf spring or rubber pad should be installed.
Check the output voltage of generator regularly. If the voltage is too high, the horn contact will be burned. If the voltage is too low (lower than the rated voltage of the horn), the horn will make abnormal sound.
When washing the car, it is not allowed to wash the trumpet directly with water, so as to prevent the water from entering the trumpet and the trumpet from sounding.
When repairing the horn, pay attention to the position of each metal pad and insulation pad, and do not install them wrong.
The continuous pronunciation of the horn shall not exceed 10s to avoid damaging the horn.
Do not put all kinds of foreign matters into the horn to avoid abnormal sound.
Item Specifics
Brand :
topcn-autoparts
Manufacturer Part Number :
TOP10808201CN
Type :
Horn
Horn Type :
High Pressure Air
Features :
Quick Release
Material :
Chrome
Color :
Silver
Placement on Vehicle :
Left
Fitment Type :
Direct Replacement
Mounting Hardware Included :
Yes
Warranty :
1 Year
Custom Bundle :
No
Modified Item :
No
Surface Finish :
Chrome
Interchange Part Number :
Air Horn
Other Part Number :
Single Trumpet
Superseded Part Number :
Truck Car SUV Boat Motorcycle Boat Horn
Diameter :
3.74"
Current :
18.0A
DB Output :
150 DB
Volt :
DC 12V
Impedance :
1Ω
Operation Air :
15-22 PSI
Weight :
2.49 lb
Length :
17.72"
Kit or Single Part :
Kit
Shipping
Payment
Returns
Customer Services
Feedback
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
1. We will leave positive feedback once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.
Copyright of Topcn-autoparts. All rights reserved.